Clinical Case Studies – Prof. Alessandro Pozzi

One of them Nobel Biocare LEADERS He is a pioneer in the digital transformation of daily dentistry. He is one of the doctors who applies it. X-Guide® most and currently under research for application Robotic arm for assisting in implant surgery., will be displayed and experienced at Nobel Biocare APAC Symposium 2026.
I. CLINICAL INFORMATION
- Patient: Female, 40 years old, with no significant medical conditions.
- Clinical condition: The right upper central incisor has a failed, loose, periapical infection with bone resorption (radiopaque area) and a metal-ceramic crown (PFM) along with... probe ở surface.
- Surgical options: dynamic guidance surgery X-Guide and instantaneous implant loading NobelParallel TiUltra in the aesthetic area in one appointment
- Prosthetic options: Immediate temporary screw-retained prosthesis, made of fired ceramic material. NobelProcera® ASC zirconia abutment.
- Date of surgery: April 2019.
- Total treatment time: 6 months.
- Tooth position: R11.
II. IMPLEMENTATION PROCESS
1. Initial clinical condition

Porcelain-metal crowns (PFM) Failed on R11. Gum recession, teeth protrude vertically, gum line is not aligned with R21, Zenith point position is reversed, leak surface. This clinical case presents a challenge for the following: instantaneous load Malocclusion includes an overbite and poor canine guidance on the right side.
2. Treatment Planning: X-Guide guided surgery for immediate prosthetic replacement in a single appointment.
CBCT and intraoral scan (IOS) Create a 3D implant plan using DTX Studio™ and then export the data to X-Guide.
Preoperative frontal clinical images and X-rays around the apex. PFM crown failure on right upper central incisor with a cavity leak clearly visible surface and infection around the apex same image translucent.
3. Detailed Planning (DTX Studio™)
Treatment planning: 3D planning and modeling. DTX Studio Implant, and cross-section It is attached to the implant axis. The implant is positioned to avoid the area translucent and anchor into quantity existing bone maximum to ensure sufficient degree initial stabilization. The angle is designed for immediate placement of a temporary crown. secured with screws.
4. Surgical procedure

X-Guide® dynamic guidance system with 360° control over tilt and position of the implant drill.

Minimally invasive tooth extraction using the method do not flip the flap, remove infected tissue around the apex and scraper thoroughly clean tooth socket after extraction. Next is... implant with the support of X-Guide, membrane cortical bone by oneself to seal the hole hole face outside the alveolar bone, and increase size (combined) with mold soft tissue heterotype to enhance healing and thickens the gum tissue. Implant positioning is assisted by X-Guide according to the planned prosthetic and surgical orientation coordinates in the DTX Studio Implant software (left). NobelParallel Conical Connection TiUltra NP 3.75 × 18 mm is placed in tooth socket after extraction to contain collagen membrane heterotype (Right).

Image chewing surface during surgery after bone grafting ở surface. Collagen membrane heterotype fixed in surface and region between teeth (left). An immediate temporary crown. secured with screws above Temporary Snap Abutment It was attached on the same day as the surgery (right).
5. Restorative Procedure

Image from 2 weeks ago after surgery: The use of X-Guide for minimally invasive surgical positioning allows healing fast and integration mold soft tissue and bone graft membrane.

A straight-on view of final restoration secured with screws (fired porcelain) prosthetic pillars zirconia NobelProcera ASC). Dental model The main 3D printed prosthesis with removable gingival prosthesis (left). Image of the inner (palatal) side of the final restoration secured with screws sintered porcelain prosthetic pillars NobelProcera ASC zirconia (right).
6. Results

A straight-on view of final restoration secured with screws sintered porcelain prosthetic pillars NobelProcera ASC zirconia. 1-year follow-up (top left). Straight-on image of the plant. final restoration secured with screws sintered porcelain prosthetic pillars NobelProcera ASC zirconia. Follow-up 2 years (bottom left). X-ray. around the apex after 1 year and 2 years of follow-up (right).





